You are here: Home Products Thickness gauges(ultra-sonic)
thickness-gauges

Products

Thickness gauges(ultra-sonic)

Application: Accurately measuring remaining wall thickness of metal pipes, tanks, beams, ship hulls, and other structures through paint and similar coatings.

Background: In many industrial and petrochemical maintenance situations it is necessary to measure the remaining thickness of metal that is subject to corrosion through one or more coats of paint or similar non-metallic coatings. With conventional ultrasonic thickness gages, the presence of paint or similar coatings will cause measurement errors, typically increasing the apparent metal thickness by more than twice the thickness of the paint, due to the paint's much slower sound velocity. Two solutions to this problem are available: echo-to-echo measurement and Thru-Coat measurement.

Sub Categories

Metal/Non-metal thickness gauges (ultrasonic)

Browse

Paint coating thickness gauges(ultrasonic)

Browse

Underwater Ultrasonic Thickness Gauge

Browse
  • Filter
  • Search
  Name SKU Description Category
nic0008-cm-8826fn-digital-paint-coating-thickness-gauge-with-cable
NIC0008-CM-8826FN DIGITAL PAINT COATING THICKNESS GAUGE WITH CABLE Operating principle: magnetic induction/eddy current (F/NF) Measuring range:0-1250um/0-50mil Resolution; 0.1/1 Accuracy: 3%n or 5um Paint coating thickness gauges(ultrasonic)
nic0007-coating-thickness-gauge-nicety-cm8801-fn
NIC0007-CM-8801FNV2 DIGITAL PAINT COATING THICKNESS GAUGE NIC0007 CM-8801FNV2 NEW DIGITAL PAINT COATING THICKNESS GAUGE ON FERROUS/NON-FERROUS BASED METALS Applications: Automotive Trade This is a great tool for car dealerships, used car buyers, appraisers, insurance agents, body shops and collision centers. It will allow you to measure the paint thickness and to identify parts of the car that might have been repaired and repainted. This might indicate previous, unreported accidents which impact the value of an used car, minivan or... Paint coating thickness gauges(ultrasonic)
nic2001-cm-8855-paint-coating-thickness-gauge-meter-complete-w-ferous-non-ferous-probes
NIC2001-CM-8855 PAINT COATING THICKNESS GAUGE METER COMPLETE W/ FEROUS/NON-FEROUS PROBES This Coating Thickness Meter  is an ideal gauge for automotive and painting applications.It uses magnetic induction and eddy current principle to measure thickness of magnetic and non-magnetic surface and detect the thickness of nonmagnetic coating on a magnetic substrate (ferrous, F) or an insulating coating on a non-magnetic conductive substrate (non-ferrous, NF). Paint coating thickness gauges(ultrasonic)
ele3100-elektrophysic-quintsonic-ultrasonic-paint-coating-for-non-metal-metal-base
ELE3100-ELEKTROPHYSIC QUINTSONIC ULTRASONIC PAINT COATING FOR NON-METAL/METAL BASE Application Non-destructive measurement of: Paint, plastic, enamel and other insulating coatings applied on wood, plastic, glass and ceramic Polymer layers on metal Performance features Measurement of the total thickness as well as the individual layer thickness of a multi-layer system in only one operation High accuracy and reproducibility Storage and documentation of measuring values Memory capacity: Maximum 10,000 measuring values in maximum 500 batches Measuring range... Paint coating thickness gauges(ultrasonic)
nic0007b
NIC0007B-ENHANCED DIGITAL COATING THICKNESS GAUGE FOR METAL BASE (FERROUS/ NON-FERROUS) DESCRIPTION This compact gauge can be used for non-destructive coating thickness measurement of non-magnetic coatings, e.g. paint, enamel, chrome on steel, and insulating coatings, e.g. paint and anodizing coatings on non-ferrous metals. The internal probe can work on both principles, magnetic induction and the eddy currents. The probe can automatically detect the substrates type (Magnetic or not), and calculate the coating thickness and display it fast. There are five data groups, and readings... Paint coating thickness gauges(ultrasonic)
tim003-tt130-digital-thickness-gauge-metallic-and-non-metallic-materials-0-01mm-1-20mm-225-0mm
TIM001-TT100SV2 DIGITAL ULTRASONIC THICKNESS GAUGE FOR METALLIC/NON-METALLIC MATERIALS-1.20MM - 225.0MM Featured item The TIM001is the most popular ultrasonic thickness gauge sold in Australia. It is a low cost, hand-held microprocessor controlled thickness gauge specifically designed for measuring the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastic, plastics, ceramics, glass and any other good ultrasonic wave-conductor as long as it has parallel top and bottom surfaces. Metal/Non-metal thickness gauges (ultrasonic)
tim006a-5mhz-8mm-probe-transducer-sensor-for-ultrasonic-thickness-gauge-meter
TIM006A-5MHz 8mm Probe Transducer Sensor for Ultrasonic Thickness Gauge Meter Featured item Introduction:Name: Probe for Ultrasonic Thickness GaugeModel: PT-08 (Lemo 00 connector)Frequency: 5MHzDiameter of the contact proportion: 8mmMeasuring Range: 0.8mm-300.0mmAvaliable Contact Temperature: ﹣10ºC-60ºCApplicaiton: use for all Ultrasonic thickness gauge Metal/Non-metal thickness gauges (ultrasonic)
Screenshot_15
TIM001B-ENHANCED DIGITAL ULTRASONIC THICKNESS GAUGE FOR METAL/NON-METAL MATERIALS-0.75MM~225.0MM Featured item 1. Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2. Transducer models are available for special application, including for coarse grain material and high temperature applications. 3. Probe-Zero function, Sound-Velocity-Calibration function. 4. Two-Point Calibration function. 5.Coupling status Indicator showing the coupling status. 6. Battery information... Metal/Non-metal thickness gauges (ultrasonic)
tmt102b
TMT101A-ADVANCED GRAPHICAL ULTRASONIC THICKNESS GAUGE (A-SCAN SNAPSHOT + THROUGH -PAINT FUNCTION) Featured item Color 320x240 Pixels Display A-Scan Snapshot Echo-Echo Mode(Thru Paint & Coatings) Stores 100,000 Readings Gain: Low, Medium or High for varying test conditions Metal/Non-metal thickness gauges (ultrasonic)
tmt102a
TMT102A-ADVANCED GRAPHICAL ULTRASONIC THICKNESS GAUGE (Live Color A-Scan +Time-based B-Scan + Through -paint function) Featured item *Color OLED 320x240 Pixels Display *Live Simultaneous Color A-Scan and Thickness Display *Control of Gain, Blanking, Gate, Range, Delay, RF and Rectify Modes *Time-based B-Scan Display *Echo-Echo Mode,Thru Paint & Coatings Metal/Non-metal thickness gauges (ultrasonic)
cyg0011
CYG001-CYGNUS DIVE WRIST-MOUNTED UNDER WATER ULTRASONIC THICKNESS GAUGE Featured item With its bright, very large, AMOLED display the Cygnus DIVE is simple to operate, providing accurate and reliable thickness measurements, underwater.  Depth rated to 300 metres. Available with data logging, topside, HelmetView™ and twin crystal probe options. MSI™ Measurement Stability Indicator - this is a feature exclusive to the Cygnus. When using the DIVE Gauge in Single Echo mode, MSI™ confirms when a reading is stable by turning the thickness measurement numbers from red to... Metal/Non-metal thickness gauges (ultrasonic)
cyg002
CYG002-CYGNUS 1 UNDERWATER ULTRASONIC THICKNESS GAUGE Featured item The Cygnus Underwater is the original diver held subsea multiple echo Ultrasonic Thickness Gauge. It was designed for use by divers undertaking subsea maintenance and surveys 3 decades ago… and today it is still the industry standard. The unit is depth rated to 300 metres and it provides an accurate metal thickness measurement through coatings up to 20mm thick. The bright LED display ensures easy viewing even in poor visibility conditions. The Underwater Thickness Gauge is supplied ready to... Metal/Non-metal thickness gauges (ultrasonic)
tmt109
TMT109-HIGH PRECISION ULTRASONIC THICKNESS GAUGE(0.15mm – 20.0mm) Featured item HIGH ACCURACY AND RESOLUTION UP TO 0.001mm or 0.0001 inch MEASURING ULTRA THIN SAMPLE AS LOW AS 0.15mm or 0.006 inch DISPLAY UNITS : IMPERIAL and METRIC AUTOMATIC SELF CALIBRATION COUPLANT INDICATOR AUTOMATIC POWER OFF DEVICE HIGH-LOW LIMIT ALARM LCD BRIGHTNESS ADJUST LOW BATTERY INDICTOR TECHNICAL SPECIFICATIONS: Measuring Range (for steel) Interface-Echo Mode: (I-E or Standard Mode) 1.50mm – 20.0mm (0.059in – 0.787 in) Echo-Echo Mode: (E-E or High... Metal/Non-metal thickness gauges (ultrasonic)
Screenshot_57
TMT109-High Precision Ultrasonic Thickness Gauge Featured item HIGH ACCURACY AND RESOLUTION UP TO 0.001mm or 0.0001 inch MEASURING ULTRA THIN SAMPLE AS LOW AS 0.15mm or 0.006 inch DISPLAY UNITS : IMPERIAL and METRIC AUTOMATIC SELF CALIBRATION COUPLANT INDICATOR AUTOMATIC POWER OFF DEVICE HIGH-LOW LIMIT ALARM LCD BRIGHTNESS ADJUST LOW BATTERY INDICATOR STANDARD DELIVERY: Main Processor with Calibration block (4.00 mm) Precision Probe (D11R) with Replaceable Delay Tip Coupling Paste Operation Manual Consumer-Type 2 AA Type Alkaline... Metal/Non-metal thickness gauges (ultrasonic)
Screenshot_13
CIA012-Basic Ultrasonic Thickness Gauge Featured item Product Description Auto Calibration to assure the accuracy Auto linear compensation: this advanced software program enhances the precision by correcting the non-linear accuracy of transducer Use ▲ and ▼ keys to make a quick adjustment for the sound velocity/thickness and a quick recall to the stored data Coupling status indication: Observing the coupling icon to learn if the coupling is accomplished or not 10 thickness measurement storage and recall function available, which... Metal/Non-metal thickness gauges (ultrasonic)
Screenshot_1
TIM001C-DIGITAL ULTRASONIC THICKNESS GAUGE FOR METAL/NON-METAL MATERIALS-0.75MM~225.0MM-W SOFTWARE Features 1.Capable of performing measurements on a wide range of material,  including metals, plastic, ceramics, composites, epoxies, glass and   other ultrasonic wave well-conductive materials. 2.Transducer models are available for special application, including for coarse grain material and high temperature applications. 3.Probe-Zero function, Sound-Veloctiy-Calibration function. 4.Two-Point Calibration function. 5.Coupling status Indicator showing the coupling status. 6.Battery... Metal/Non-metal thickness gauges (ultrasonic)
Screenshot_50
TMT114-CROSS HATCH CUTTER Specifications H cross hatch cutter is applicable to determine the adhesion of organic coatings by cross-hatching. This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate. The Cross Hatch Cutters conform with the requirements of :BS 3900 E6;BS/EN ISO 2409;ASTM D 3359;GB/T 9286, ,it is economy. Main Technical Parameters: 1.Six working... CROSS HATCH CUTTER