Products

Basic T&M

The GW Instek Basic Test & Measurement instruments can be divided into 4 groups: Digital Meters, LCR Meters, Safety Testers, and Specific Application T&M Instruments.

In the Digital Meter group, we provide 6 ½ digit, 5 ½ digit, 4 ½ digit, as well as 3 ½ digit benchtop multimeters, 4 ½ and lower digit handheld multimeters as well as a range of DC milliohm meters and AC power meter.

LCR Meter includes two main series, LCR-8000G and LCR-800 Series. Depending on the model, these series feature frequency of 2kHz ~ 10MHz, and accuracy of 0.05% ~ 0.1%.

For Safety testing, GPT-9900 and GPT-9800 Series safety testers provide you with a safe and quick measurement tool for AC/DC withstanding voltage tests, insulation resistance tests, and ground continuity tests. GLC-9000 leakage current tester supports all the major leakage current test standards for medical and general electrical equipment.

In order to provide a complete "one stop shopping" solution, 120MHz ~ 2.7GHz high precision frequency counters, automatic distortion meters and A.C. millivolt meters are also provided in this product line.

  • Filter
  Name SKU Description Category
GW INSTEK GAD-201G Features: ※ Automatic level & distortion measurements ※ Auto or Hold function selectable ※ 0.1% ~ 100% in 7 distortion measuring ranges ※ 20Hz ~ 20kHz in 3 continuous ranges ※ 400Hz, 1kHz, 10kHz 3 frequency spots ※ 1mVrms ~ 300Vrms in 12 ACV measuring ranges   Other Application Instruments
GW INSTEK GVT-427B/417B Features: ※ 300μV Full Scale Sensitivity ※ Measurement Frequency: 10Hz ~ 1MHz ※ Measurement Amplitude: -70dB ~ +40dB in 12 Ranges ※ Dual Channel (GVT-427B)※ CE Approved (GVT-417B) Other Application Instruments
GW INSTEK GFC-8270H/8131H Features: ※ Frequency and Period Measurement※ High Resolution at Both High and Low Frequency※ 0.01Hz~2.7GHz Frequency Range(GFC-8270H)※ 0.01Hz~1.3GHz Frequency Range(GFC-8131H)※ 10mV rms High Sensitivity ※ 100nHz Resolution for 1Hz Input ※ Variable Trigger Level Control※ Microprocessor Controlled Intelligent Counter(only GFC-8270H) Other Application Instruments
GW INSTEK GFC-8010H Features: ※ 10Hz ~ 120MHz Range ※ 8 Digits Display (0.3"LED) ※ 15mV rms High Sensitivity ※ 5PPM High Stability Time Base ※ Frequency and Period Measurement ※ Low Pass Filter Function ※ Over-Flow Indicatot Other Application Instruments
GW INSTEK GPM-8212 Features: ※ Simultaneous Display of W, A, V ( PF or Hz ) ※ True RMS V, A, W ※ Auto Calibration Via Computer ※ Max. / Min. / Hold Function ※ High Immunity to External Noise ※ CT Ratio (1 ~ 9999) ※ PT Ratio (1 ~ 9999) Other Application Instruments
GW INSTEK GLP-1A Features: ※ Combining a Logic Probe and Pulser Combined into One ※ Probe for Troubleshooting Digital Circuits ※ Operating Voltage: 4VDC ~ 18VDC※ Maximum Input Signal Frequency: 50MHz ※ TTL: Logic “1”>3.0V±0.25V, Logic”0”<0.75±0.25V ※ CMOS: Logic “1”>60%VCC±5%, Logic”0”<15%VCC±5% ※ Minimum Detectable Pulse Width: 10nsec ※ Pulser: Sync input impedance 120kΩ ※ Pulse Repetition Rate: Switchable 0.5/400Hz ※ Pulse width: 10μsec ※ Dimensions... Other Application Instruments
GW INSTEK ATA-002 Features * Wideband, Upper Resonant Frequency 1GHz* Primary Sensor Type : H-Field* Weight (kg) : 0.25* For : GSP-Series(An addirional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers) Other Application Instruments