Characteristics
General
Number of Channels - (all channels are acquired
including clocks).
TLA5201: 34 channels (2 are clock channels).
TLA5202: 68 channels (4 are clock channels).
TLA5203: 102 channels (4 are clock and 2 are qualifier
channels).
TLA5204: 136 channels (4 are clock and 4 are qualifier
channels).
Time Stamp - 51-Bits at 125 ps resolution (3.25 days
duration).
Clocking/Acquisition Modes - Internal, internal 2X,
internal 4X, external, external 2X, source synchronous. 125 ps
(8 GHz) MagniVu™ high-speed timing is available simultaneous
with all modes.
Input Characteristics (with P64xx probes)
Capacitive Loading -
<0.7 pF typical data/clock (P6419).
1.4 pF typical data; 2 pF typical clock (P6418).
2 pF typical data/clock (P6417, P6434).
Threshold Selection Range - From -2.0 V to +4.5 V in 5
mV increments.
Threshold presets include TTL (1.5 V), CMOS (1.65 V), ECL
(–1.3 V), PECL (3.7 V), LVPECL (2.0 V), LVCMOS 1.5 V (0.75 V),
LVCMOS 1.8 V (0.9 V), LVCMOS 2.5 V (1.25 V), LVCMOS 3.3 V (1.65
V), LVDS (0 V), and user-defined.
Threshold Selection Channel Granularity - Separate
selection for each of the clock/qualifier channels and one per
group of 16 data channels.
Threshold Accuracy (including probe) - ±(100mV).
Input Voltage Range -
Operating: -2.5 V to 5.0 V.
Nondestructive: ±15 V.
Minimum Input Signal Swing -
±250mV (P6417, P6418, P6419).
±300mV (P6434).
Input Signal Minimum Slew Rate - 200 mV/ns typical.
State Acquisition Characteristics
Maximum State Clock Rate - 235 MHz.
Maximum State Data Rate - 470 Mb/s.
State Record Length with Timestamps (half/full channels) -
1 Mb/512 Kb , 4/2 Mb , 16/8 Mb.
Setup and Hold Time Selection Range - 16 ns range that
may be shifted towards the setup region by 0 ns [+8, -8] ns, 4
ns [+12, -4] ns, or 8 ns [+16, 0] ns.
Setup-and-hold Window -
All Channels: 1.5 ns typical.
Minimum Clock Pulse Width -
1.5 ns (P6434).
1.25 ns (P6417, P6418, P6419).
Demux Channel Selection - Channels can be
demultiplexed to other channels through user interface with 8
channel granularity.
Timing Acquisition Characteristics
MagniVu™ Timing Resolution - 125 ps (8 GHz).
Storage rate adjustable to 250 ps, 500 ps, 1 ns, and 2 ns.
MagniVu Timing Record Length - 16 Kb per channel, with
adjustable trigger position.
Timing Resolution (quarter/half/full channels) - 500
ps/1 ns/2 ns to 50 ms.
Timing Record Length (quarter/half/full channels with
timestamps and with or without transitional storage) - 2
Mb/1 Mb/512 Kb, 8/4/2 Mb, 32/16/8 Mb per channel.
Timing Record Length with Glitch Storage Enabled - Half
of default main record length.
Channel-to-channel Skew - 1 ns (900 ps typical).
Minimum Recognizable Pulse/Glitch Width (single channel) -
1 ns (P6417, P6418, P6419) 1.25 ns (P6434).
Minimum Detectable Setup/Hold Violation - 250 ps.
Minimum Recognizable Multi-channel Trigger Event - Sample
period + channel-to-channel skew.
Trigger Characteristics
Independent Trigger States - 16.
Maximum Independent If/then Clauses per State - 16.
Maximum Number of Events per If/then Clause - 8.
Maximum Number of Actions per If/then Clause - 8.
Maximum Number of Trigger Events - 18 (2
counter/timers plus any 16 other resources).
Number of Word Recognizers - 16.
Number of Transition Recognizers - 16.
Number of Range Recognizers - 4.
Number of Counter/Timers - 2.
Trigger Event Types - Word, group, channel,
transition, range, anything, counter value, timer value, signal,
glitch, setup-and-hold violation, snapshot.
Trigger Action Types - Trigger main, trigger MagniVu™,
store, don't store, start store, stop store, increment counter,
decrement counter, reset counter, start timer, stop timer, reset
timer, snapshot current sample, goto state, set/clear signal, do
nothing.
Trigger Sequence Rate - DC to 500 MHz (2 ns).
Counter/Timer Range - 51 Bits each (>50 days at 2
ns).
Counter Rate - DC to 500 MHz (2 ns).
Timer Clock Rate - 500 MHz (2 ns).
Counter/Timer Latency - 2 ns.
Range Recognizers - Double bounded (can be as wide as
any group, must be grouped according to specified order of
significance).
Setup-and-hold Violation Recognizer Setup Time Range - From
8 ns before to 7.5 ns after clock edge in 125 ps increments.
Setup-and-hold Violation Recognizer Hold Time Range - From
7.5 ns before to 8 ns after clock edge in 125 ps increments.
Trigger Position - Any data sample.
MagniVu™ Trigger Position - MagniVu position can be
set from 0% to 60% centered around the MagniVu trigger.
Storage Control (data qualification) - Global
(conditional), by state (start/stop), block, by trigger action,
or transitional. Force main prefill selection available.
iView™ (Integrated View) Capability
TDS oscilloscope configuration requirements - The
iView cable does not connect fully to the TDS1000/2000 Series
oscilloscopes without a GPIB extender. Tektronix recommends a
standard GPIB cable as an extender, or order a cable extender
(National Instruments part number 181638-1). TDS2CMAX
Communications Extension Module required for iView capability on
any TDS1000/2000 Series. TDS3GM GPIB/RS232 Interface Module
required for iView capability on any TDS3000 Series. TDS3GV GPIB/RS232/VGA
Interface Module required for iView capability on any TDS3000B
Series.
Number of TDS oscilloscopes that can be connected to a TLA
system - 1.
External Oscilloscopes Supported - For a complete list
of currently supported TDS oscilloscopes, please visit our
website http://www.tektronix.com/iview.
TLA Connections - USB, Trigger In, Trigger Out, Clock
Out.
TDS Connections - GPIB, Trigger In, Trigger Out, Clock
In (when available).
Setup - iView external oscilloscope wizard automates
setup.
Data Correlation - After TDS oscilloscope acquisition
is complete, data is automatically transferred to the TLA and
time correlated with the TLA acquisition data.
Deskew - TDS and TLA data is automatically deskewed
and time correlated when using the iView external oscilloscope
cable.
iView External Oscilloscope Cable Length - 2 m.
PC Characteristics
Operating System - Microsoft Windows XP Professional
with Multi-Lingual User Interface Pack.
Processor - Intel Celeron 2.0 GHz.
Chipset - Intel 865G.
DRAM - 512 MB SDRAM.
Sound - 16-Bit I/O and Mic In port.
Hard Drive - ≥80 GB.
Optical Drive - Internal 24/10/24 CD-RW.
Floppy Drive - Built-in 3.5 in. 1.44 MB drive.
Integral Controls
Front-Panel Display -
Size: 10.4 in. (26.4 cm) diagonal.
Type: Active-matrix color TFT LCD with backlight.
Resolution: 1024×768.
Colors: 256 K.
Simultaneous Display Capability - The front-panel and
secondary displays can be operated simultaneously using the same
resolution. The secondary external display can be used
simultaneously using an independent resolution.
Front-panel Controls - Special function knobs for
instrument control and mini-QWERTY keypad.
External Peripheral Interfaces
External Display Port Type - Two female DB15 SVGA.
External Display Resolution - Up to 1600x1200
non-interlaced at 16.8 M colors.
LAN Port Type - 10/100Base-T, RJ-45.
External Keyboard Port Type - PS2 mini-DIN.
External Mouse Port Type - PS2 mini-DIN.
Parallel Interface Port Type - Female DB25.
Parallel Interface Modes - Centronics mode, EPP
(Extended Parallel Port), ECP (Microsoft high-speed mode).
Serial Interface Port Type - Male DB9.
Audio Out Port Type - Stereo minijack.
Mic In Port Type - Minijack.
USB Port - Four USB 2.0.
Symbolic Support
Number of Symbols/Ranges - Unlimited (limited only by
amount of virtual memory available on TLA).
Object File Formats Supported - IEEE695, OMF 51, OMF
86, OMF 166, OMF 286, OMF 386, COFF, Elf/Dwarf 1 and 2,
Elf/Stabs, TSF (TSF is a generic ASCII file format documented in
the TLA user manual). If a format is not listed, please contact
your local Tektronix representative.
External Instrumentation Interfaces
System Trigger Output - Asserted whenever a system
trigger occurs (TTL-compatible output, back-terminated into 50 Ω).
BNC type connector.
System Trigger Input - Forces a system trigger
(triggers all modules) when asserted (TTL-compatible,
edge-sensitive, falling-edge latched). BNC type connector.
External Signal Output - Can be used to drive external
circuitry from a module's trigger mechanism (TTL-compatible
output, back-terminated into 50 Ω). BNC type
connector.
External Signal Input - Can be used to provide an
external signal to arm or trigger any or all modules (TTL-compatible,
level-sensitive). BNC type connector.
Power
Voltage range/frequency - 90-240 VAC at 47-63 Hz.
Input current - 5 A maximum at 90 VAC.
Power consumption - 300 W maximum.
Physical Characteristics
|
TLA5000
|
|
Dimensions
|
mm
|
in.
|
|
Height
|
285
|
11.2
|
|
Width
|
438
|
17.5
|
|
Depth
|
288
|
11.35
|
|
Weight
|
kg
|
lb.
|
|
Net (w/o probes)
|
12
|
26
|
|
Shipping (typical)
|
18.5
|
41
|
|
