Name	Description	Category
TES-2700/2712 LCR Multimeter	MODEL TES-2700 Autoranging and Auto-power-off 3200 count LCD with analog bar-graph Data-hold mode available at ohms. Overload protection up to 600 Vrms MODEL TES-2712 3 1/2 LCD Data-hold and peak-hold function available Inductance, Capacitance & ohm measurement	Multimeter
TES-2732A Datalogger Multimeter (RS-232)	DMM talks with P.C. via RS-232 interface Data Logger function Direct input of V, A, Ohm, Hz, Cx & o C/ o F without any further singnal modification	Multimeter
PROVA 801/803 Digital Multi-Meter	60,000 count and dual input channels 0.04% DC basic accuracy and 0.2% AC basic accuracy Bandwidth of 10KHz(max) Fast ACV, ACA response Dual channels measurement similar to a dual channels DSO(V+V,V+A) Hz + duty cycle dual display Capacitance measurement Standalone data logging of 10,708 records for both channels(803) RS-232C interface Application Software (Option) 1/7 the cost	Multimeter
PROVA 901/903 Digital Multi-Meter	The DMM to replace your bench-top one 0.02% DC and 0.1% AC basic accuracy 60,000 counts resolution 200KHz (max.) bandwidth True RMS with fast ACV/ACA response Dual channels measurement similar to a dual channels DSO (V+V, V+A) RS-232C ASCII interface Data logging (model 903 with 10,708 records for both channels) Capacitance measurement Free software (901,903) 1/3 the cost	Multimeter
PROVA 700 Milli-Ohmmeter	Best resolution 1μΩ. Accuracy 0.05% 5A (120 mΩ) max. test current. Manual or Auto Range. (There are 6 ranges of current measurement, and furthermore 3 ranges in each current range.) Measurement of resistive and inductive materials (Two terminal measurement; Four terminal Kelvin measurement) Programmable Hi-Lo alarm with memory of 20 data. Auto-judgments of Hi (readings higher than Hi-Limit), Lo (readings lower than Lo-Limit) and Pass (readings between Hi-Lo Limits). Alarm (beeper) for...	Milli-Ohmmeter
TES-133 Luminous Flux Meter	4-digit LCD reading. Spectral Sensitivity close to CIE photopic Curve. Auto ranging from 0.05 to 7000 lumens. Accurate and Instant response. Data Hold function. Data memory and read function. Zero function. Ratio function. Sort function. Comparator function. Best for measuring : LEDs, Small lamps, Fiber illuminators. Auto power off function. RS232 Interface. Easy to use. Adapters kit : 2/3/4/5/8/10m/m	Luminous Flux Meter
TES-1800 LOOP / PSC Tester	TES-1800A (230V) TES-1800B (110V) Large custom high contrast display. Auto lock out if test resister overheats. Voltage indication. Measure low loop with 0.01 W resolution. High loop range permit measurement of ground spikes. Microprocessor controlled.	Loop / PSC Tester
TES-1330A/1332A/1334A Light Meter	Spectral Sensitivity close to CIE photo pic Curve Cosine Angular corrected Analog output jack for recording (TES-1332A/1334A) Data Hold function, Peak Hold function for 1334	Light Meter
TES-1335 Digital Light Meter	Spectral Sensitivity close to CIE photopic Curve. Measuring Levels Ranging 0 to 400,000 Lux, 0 to 40, 000 fc. Accurate and Instant response. Data Hold function. MAX/MIN function. Peak Hold function. Relative function. Cosine Angular corrected. Auto-Power-Off function. CNS 5119 class11	Light Meter
TES-1336A Datalogging Light Meter (USB)	Spectrum of photo sensor meets C.I.E. photopic curve V( l ) 16000 Records Data logging capacity USB interface (software included) Measurement of luminous intensity (PC Software)	Light Meter
TES-1339 Light Meter Pro.	Dual Display, 4-digit LCD reading. Spectral Sensitivity close to CIE photopic Curve. Measuring Levels Ranging 0.01 to 999900 Lux,0.01 to 99990 fc, Autoranging 5 step. Accurate and Instant response. Integral illuminance measurement. Luminous intensity measurement. Data Hold function. Data memory and read function. Reference value setting for relative or percentage deviation measurement. Ripple measurement for STRAY + LIGHT function. Time-hold function. Point - average...	Light Meter
TES-1339R Data Logger Light Meter Pro.	Dual Display, 4-digit LCD reading. Spectral Sensitivity close to CIE photopic Curve. Measuring Levels Ranging 0.01 to 999900 Lux,0.001 to 92927 fc, Autoranging 5 step. Accurate and Instant response. Integral illuminance measurement. Luminous intensity measurement. Data Hold function. Data memory and read function. Data logger function. Reference value setting for relative or percentage deviation measurement. Ripple measurement for STRAY + LIGHT function. Time-hold function. Point...	Light Meter
TES-45 CAT-5 Lan Cable Tester	Test a wide range of UTP cables such as 10Base T , 100Base Tx , 10Base 2 (Coax), 356A , TIA-568A , TIA-568B, etc. Can tests for wiring faults such as open, short , reversed , crossed and split wires. Can identify up to 4 different cables at one end by provided remote identifiers. Double digital 14-segment LED and 4 pair LEDs clearly display the fault status. Provided over voltage (max.56V) protection to prevent damage frommiss connecting to live circuit of networking. Simple and...	Lan Cable Tester
TES-46 CAT-5 Lan Cable Tester	Tests : UTP. FTP. Coax cables, two, three, or four wire pairs in twisted pair cables and test all category UTP cables and hardware. Verify end-to-end connectivity per EIA/TIA 568 wiring standard. Detects wiring problems : Opens, Shorts, miswires (Crossed, Reversed, Split pair). Locates wiring/connection errors (distance to the open or shout) Measures cable length Easy to use only : One button to select the test and two lines characters LCD display. Low battery, Auto power off, long...	Lan Cable Tester
TES-1600 Insulation Tester	2000M W /1000V, 200M W /500V, 200M W /250V Power lock for 3 minutes (Auto power off) Auto-Zero adjustment Data-Hold-Function	Insulation Tester
TES-1601 Auto Ranging Insulation Tester	4000M W /1000V, 4000M W /500V, 4000M W /250V Power lock for 3 minutes (Auto power off) Auto-Zero adjustment Data-Hold-Function	Insulation Tester
TES-1604 AUTORANGING INSULATION TESTER RS-232 Window Version, Data Logger	Innovational logging feature (7000) to memorize all of measurements from the work place RS-232 interface with valued software 4,000M W /V Reding/10,000M W analog indication Backlight illumination 3-3/4 Digital LCD, 4000Count Auto Range for Mega Ohm range 50 segments Log Scaled Analog Display Easy to carry testing package Tests insulation at rated voltage into a 1mA load 200mA short circuit continuity current Meet VED0413 Auto discharge	Insulation Tester
TES-3660 Autoranging Insulation Tester	Large LCD with analog bar graph and digital display. 250V, 500V, 1000V output voltage for insulation M Ω testing. 4000M Ω insulation testing with automatically switch to voltage measurement. Lo Ω function for testing connections. Autodischarge of capacitive voltage charges. Last reading HOLD display. AC/DC voltage measurement up to 1000V. Manual data memory and read function (9 sets). Meets EN61557 and IEC1010-1, CAT III 1000V. Size : 235(L)x116(W)x54(H)mm (9.3"Lx4.6"Wx2.1"H)	Insulation Tester
TES-1260 Humidity Temperature Meter	Dual LCD display. Dew Point Reading. Wet bulb Reading. MAX/MIN with Time Stamp. Data Hold function. ℃ & ℉ Switchable. DATA memory and read function (99 readings from LCD display) Auto Power Off.	Humidity / Temperature Meter
TES-1360A Humidity/Temperature Meter	Laboratory Quality Control Air-Conditioning Process Engineering	Humidity / Temperature Meter