|
Function
|
Specification
|
|
▣
Output
Characteristics
|
|
Waveforms
|
Sine, Square, Triangle,
Ramp, Pulse, Sawtooth,
TTL Leveled Square
|
|
Frequency Range
|
Sine wave: 0.2Hz to
20MHz
Square & Triangle wave : 0.2Hz to 10MHz
Range selection in 8 Range (1,10,100,1K,10K,100K,1M,10M)
|
|
Frequency Accuracy
|
+/-
5% of full scale
|
|
Output Level
|
20 ±1 Vp-p in open
circuit 10 ±0.5 Vp-p into 50 W Load
|
|
Output Impedance
|
50
ohm +/- 5%
|
|
Attenuator
|
20 dB fixed and
continuously variable(20dB)
|
|
▣
Waveform
Characteristics
|
|
Sine wave
|
Flatness : +/- 3dB to
20MHz
|
|
Distortion : Less than
1.5 % at 0.2 Hz to 100 kHz
|
|
Square wave
|
Rise and Fall Time :
Less than 25 nSec at 10MHz
|
|
Triangle wave
|
Linearity
: More than 99% at 0.2 Hz to 100 kHz
|
|
TTL Output
|
Rise and Fall Time :
Less than 25 nSec at 10MHz TTL Level : H 2.4V, L 0.4V
|
|
Symmetry Variation
|
Sine & Square :
80:20 to 20:80 at 0.2Hz to 2MHzTriangle : 80:20 to 20:80
at 0.2Hz to 1MHz
|
|
▣
Sweep Function
Characteristics
|
|
Mode
|
Linear
|
|
Width
|
Variable from 1 :1 to
100 : 1
|
|
Rate
|
0.5Hz to 50Hz(20mSec
to 2Sec)
|
|
External VCF Input
|
Input Voltage 0 to 10V
|
|
Input Impedance :
Approx. 10 kohm
|
|
▣
Frequency
Counter Characteristics
|
|
Display
|
8digit Green LED,
Overflow, Gate time, MHz, kHz, Hz,
|
|
Frequency Range
|
Input A: 0.1HzHz to
100MHz, Input C: 80MHz to 3.0GHz
|
|
Accuracy
|
+/- Timebase Error+/-
1 Count
|
|
Low pass Filter
|
-3dB, 100kHz
|
|
Time base
|
10MHz, TCO, 1PPM
|
|
Input Sensitivity
|
Input A : 30mVrms(0.1Hz
-80MHz), 70mVrms(80-100MHz)
Input C : 20mVrms(80MHz
to 2.0GHz) 70mVrms(2.0GHz to 3.0GHz with RG58
cable)40mVrms(2.0GHz to 3.0GHz with RG400 cable)
|
|
Max. Input Voltage
|
Input A: 250Vp-p ,
Input C: 3Vrms
|
|
▣
General
|
|
Power Requirement
|
115V or 230 VAC +/-
10%, 48 to 66Hz
|
|
Operating Temperature
|
0 to 50 °C (Accuracy
specified at 23 +/- 5 °C)
|
|
Dimension
|
240(W) X 260(D) X
95(H)mm
|
|
Weight
|
Approx. 3 kg
|
